Видео

I have set it at least 20 times, no luck. At this point I'm thinking its broken. Many times in the beginning I would see it sprung up and when I would pull it out it had a bunch of dirt in it but no gopher

Thank you for using my voice for this project! Sounds and looks great!

This is the best video, simple, short, and straight to the point. Every video should be like this one.

the algorithm sent me this 20 view video with one like about sanitarion facility products. i am commenting so that you too, dear comment reader, can share my befuddlement.

I have several of these hooks in my houses and sheds to help keep things organized and accessible. These are "forever" solutions. These fixtures are extremely well made, built to last, and perform perfectly. Gemplers has never let me down.

Wish I had come here before buying. Notice the video blacks out on him opening the one side. My guess is he couldn’t do it either & used some other tool to get the one side. Clearly the other side is easier once first side is open. This key sucks. Don’t buy this crap.

Very well explained

Can this be left outside in freezing temperatures? What is the temperature limit?

Devon looks like she is being held against her will thanks for the video, even if you had to kidnap Devon to make it.

What 3m filter would I need to filter out gasoline/diesel, welding/torching fumes and vapors?

Great video thanks

It didn’t score well on some RUclips channel tests but that didn’t deter me from ordering some through Durabak. I’m starting on the rusted roof of a Chevy Express van and will see how it goes. It doesn’t have to beat every product out there in tests if it works in real life.

Cotton duck, sandstone duck etc etc sounds like made up bullshit created to sell cheep chinese (that's right with a small c) products.

Not great for spading but superb for uprooting shrubs, tipping rocks and if your child enjoys breaking tools to get out of work, get them this or Corona's version.

I wish I would have watched this video instead of throwing the thing across the yard and now in the trash!

the new units might disassemble without any effort but I can assure you that you need a heat gun to reinstall the pressure cylinder and a kettle of boiling water to remove it. It seems the plastic tank either shrinks over time or when its cooler. Mines a German 475 its good apart from the naff manual and partial how too video.

Is it a one-time use? Or can you reset it and use it multiple times?

Love this! Communities need more of this interconnectedness! Well done Gemplers 👏

Is it just me or is the robotic autocue nature of her delivery surprisingly and curiously hot?

Whu...? At ruclips.net/video/Xx1Z7NKzGKI/видео.html, "..push down on the pressure-cylinder, so that about 1/2 an inch is out of the tank..." On mine, there's no such clearance. The ring of screws, even without my having pushed the cylinder out at ALL, is RIGHT against the poly that prevents it from being pushed straight out. I took a die-grinder to the area that was preventing movement, and got it out. BTW, adding to the simpler list of things that might cause it not to build up pressure: there's a little nylon screen-window pair that you can only get to by pushing the pressure-cylinder out (in my case, it was just a LARGE hammer and block of wood to provide a spacer). The screens were both covered by a residue that I've seen before, stuff that forms when I don't take the time to dump and rinse after spraying certain herbicides. Previously it's only clogged within the spray-wand, but this time...lesson learned.

The key works but that is after I wedged a butter knife in to open first time to see what the tabs look like. In the long run it’s much easier just to remove the tabs so I can easily open it and reload it. If you are worried about safety you can zip tie it closed. I also miss the clear window to see if all the bait is gone or not. The plastic tabs can be removed easy with nail clippers or garden shears.

Nice job, Brandon! ❤

Great job!

Munchkey apples are great and so is Gemplers! Two great companies!

The chemistry between these two is amazing. I bet they leave the PPE at the bedroom door.

what do you recommend for a van roof and bed with holes rusting through?

Looks really nice. Where is it made?

Thank you, great video

Please don't dig with an all metal shovel

thanks ! did not know difference !

I want one!

Ajoyib. Kallanga balli

Thank you for the demonstration!

How much is the piston repair kit

Excelente Brother

Starting around 0:16 the key lock system is an ill-conceived, stupid, cantankerous design that will have you swearing like a sailor no matter how many times you use it. It never gets easier. The (edited) video makes it look easy, it's not. If your trap is full of droppings and fragments of poison and you want to open it without getting mess and poison everywhere, forget about it! I tried to push down even harder on the key because it wasn't working, my hand slipped off the key, the back of my thumb went full-strength down the side of the box, with the cuticle of my thumbnail catching on the end of lip of the box and peeling back probably 3mm. Blood everywhere, and doesn't exactly tickle either. So that's great, I also had an open wound inches away from poison I was handling. I think it would be better to drill out the locks and just use some Philips head screws to keep this thing closed. EDIT - I just read the comments complaining about the same thing and I feel a little better. I am irritable today and this thing just sent me over the edge, I was hairs breadth from just stomping the whole thing flat with my boots

great video, it's my second time needing to have to watch this, but why stacey look tense like he got a ripe banana up an orifice ?

On peut l'avoir en français

Hello

❤❤

What filter do I need if I weld, grind, 3d print with resin, air brush, and spray paint?

We are the producers of the filter box assembly machine of cup -type dust mask machine and anti -virus mask. We look forward to making friends with you.

Hi. please be so kind and advise which filter is quite enough for : 1. Preventing tear gas effect? 2. In case of fire to prevent from smoke? Thanks a lot and G. Luck

Whoa!!! Looks almost identical to my RL Flo-pro backpack piston pump sprayer (model 614RL). But my search looks like RL Flo-master or Flo-pro is manufactured by Hudson. Hudson may or may not be same company as Root-Lowell Manufacturing co. or Solo. Or Solo had Hudson make the sprayer for them????? Anybody know if they are all the same company?

I have followed your video instructions very carefully. However, when I get to removing the tank with a block and hammer, it will not come out. It appears that while hard to see, the bottom portion of the pressure tank inside the sprayer tank may be larger than the hole through which it is supposed to be removed. I have a complete pressure tank/piston pump ordered and on the way. I do not want to break the body of the tank. Can you please offer a suggestion? Do I need to cut the old out, and then will the new fit? The pressure tank piston assembly is supposed to be an exact fit for my Solo 425. Thank you.

If the piston cover does not come off, what should you do?

Merci mon reuf mdr